KHOLH 44-Inch Propane Fire Pit Table

The most common mistake buyers make with propane fire pit tables is treating BTU output as a style spec rather than a functional one. It isn't. 60,000 BTU — the output on this KHOLH table — sits at the upper end of the 50,000–65,000 BTU range typical for outdoor fire tables. In practical terms: on a 50°F evening, you'll feel meaningful warmth within roughly 4–5 feet of the burner. That's enough to extend a gathering well past sunset in most US climates without swapping tanks mid-conversation. Smaller tables in this category running 40,000–48,000 BTU fall noticeably short at those temperatures.

The wind guard matters more than most product listings acknowledge. A propane flame in an open-air table is vulnerable to crosswinds that either blow it out entirely or create uneven, flickering combustion. The KHOLH table includes a glass wind guard panel around the burner pan — this keeps the flame stable in light-to-moderate wind without blocking the radiant heat. It's a component worth specifically confirming on any fire table you're comparing, because not every table at this size includes it.

The dual-function lid is worth understanding before purchase. When the propane is off and the steel cover is in place, this table functions as a standard rectangular outdoor coffee table. That matters on a patio with limited square footage where you can't justify a piece of furniture that's only usable three seasons or only when you're running propane. The glass tabletop insert (removable) and the cover lid convert the surface between fire mode and coffee table mode in under a minute. For anyone evaluating whether a standalone fire table is worth the footprint, that conversion capability is the deciding factor.

At 28.3 × 44 × 26 inches, this is a full-size rectangular fire table — not a compact round accent piece. The 44-inch length is intentional: it gives a natural focal point for seating arranged on two or three sides, which is how most people use a fire table in conversation. You need enough clearance around the table for chairs or a sofa on each side — plan for at least a 10 × 12-foot clear zone to seat four to six people comfortably with safe distance from the flame. In tighter spaces, the table still works, but the seating arrangement becomes more linear and less conversational.

This table integrates cleanly into three common patio configurations:

• As the centerpiece of an existing seating set. If you already own outdoor chairs or a sectional sofa without a fire element, the KHOLH fire table replaces a standard coffee table and adds the fire feature without requiring a full furniture replacement. The 26-inch height is consistent with standard outdoor coffee table height, so it fits most existing seating.
• As the anchor for a new setup from scratch. Buy the fire table first, then arrange seating around it. The rectangular footprint works better with straight or L-shaped sofa configurations than with curved sectionals — the long sides of the table align naturally with sofa runs.
• As a standalone feature on a covered porch or deck. The wicker exterior and brown colorway integrate with most existing outdoor furniture aesthetics. If the porch has a ceiling, verify clearance above the flame — most fire table manufacturers recommend a minimum of 48 inches of overhead clearance for open-air propane combustion.

The wicker wrap on the table's exterior is all-weather PE wicker, not natural rattan. PE wicker won't absorb moisture, won't crack from UV exposure, and won't swell in humid climates the way natural wicker does. That matters specifically for a fire table, because the table surface near the burner experiences heat cycling and occasional moisture from rain — natural wicker would deteriorate in that environment faster than in a standard chair application.

The burner on this table is CSA-certified — that's a third-party safety standard from the Canadian Standards Association covering the ignition system, gas valves, and burner construction for North American use. It's not a marketing badge; it means the ignition and gas components have been independently tested against specific safety criteria. When using any propane fire table, connect only standard 20 lb. propane tanks (the same size used for most gas grills), check the hose fitting for cracks or wear before each season's first use, and keep the tank compartment ventilated — never seal it completely.

A few operational specifics worth knowing:

• Glass wind guard: The tempered glass panels are weather-resistant but susceptible to thermal shock. Avoid pouring cold water on them when the glass is hot from the burner. Clean with a soft cloth and standard glass cleaner when cool.
• Fire glass or lava rocks: Moisture trapped in the burner pan can cause popping or uneven ignition. If the table has been rained on, let it dry fully before lighting — particularly after extended wet periods.
• Ash and debris: Unlike a wood fire pit, a propane table produces no ash. However, leaves, pollen, and outdoor debris can settle into the burner pan when the table is in coffee-table mode. Check and clear the pan before igniting.
• Flame height: The regulator knob controls BTU output, which affects both heat and flame height. Start low and increase gradually — max output at 60,000 BTU produces a flame that extends above the glass guard level. In a covered or enclosed space, keep output moderated.

For seasonal storage: the PE wicker exterior requires no special treatment, but using a fitted outdoor furniture cover during winter storage — especially in climates with heavy snow load or sustained below-freezing temperatures — protects the wicker weave from weight stress and keeps the burner components dry. Disconnect and store the propane tank separately, never in an enclosed garage or indoor storage space. The glass tabletop is removable; storing it indoors during winter prevents any risk of freeze-thaw cracking from water trapped in the frame channel.